Firebird FH11CF folding knife

Description of the Firebird (by Ganzo) FH11CF knife:

A good folding knife will allow you to easily cut products, cut fabric, process wood or other material. The Firebird FH11-CF model is just such a knife. In addition, the presented folding knife has excellent ergonomics and has a simple, laconic design.

Its blade confidently copes with cutting almost any material, as it is made in the form of a Normal blade and has a smooth sharpening of the cutting edge. And due to the use of D2 stainless steel for its manufacture, the FH11-CF knife remains sharp for a long time, does not bend even under heavy loads and is not susceptible to corrosion.

The blade is extremely easy to pull out. To do this, you just need to press a special “flipper” with a little effort, which, in addition, when open, protects the user from accidental injuries when using the knife, acting as a guard.

In the open position, the blade is fixed using a Liner-lock. This is an extremely simple mechanism that is unpretentious to operating conditions and very easy to maintain.

The handle of the Firebird FH11-CF folding knife consists of only a couple of components. These are 2 steel liners that lie at the base and provide structural strength and overlays on both sides made of wear-resistant G10 material and an outer layer of carbon fiber (Carbon Fiber). They not only make the design of the knife original, but also, due to the high-quality assembly and careful adjustment of the components, allow you to hold the knife with maximum comfort in almost any grip.

To secure the Firebird FH11-CF knife to clothing and equipment, the manufacturer has provided a special hole for a safety lanyard in the end part of the handle and standardly equips the knife with a removable metal clip.

Features:

• The Firebird FH11-CF knife has a complex design;
• you can open the knife using a special "swimmer";
• the length of the knife when open is 20.5 cm;
• The blade is 8.7 cm long and 3.3 mm thick at the butt;
• stainless steel with the D2 marking is used to make the blade;
• blade hardness on the Rockwell scale - ~60 units (HRC);
• the Firebird FH11-CF knife has special finger rests;
• pads on both sides made of wear-resistant G10 material and an outer layer of carbon fiber (Carbon Fiber);
• the knife is equipped with a removable steel clip and has a hole for installing a safety lanyard;
• The Firebird FH11-CF model weighs 114 grams.

Lifetime warranty terms:

1. The lifetime warranty applies exclusively to original knives purchased from official brand agents;
2. The lifetime warranty applies exclusively to original knives;
3. The lifetime warranty is valid only if the knife is used responsibly;
4. The lifetime warranty provides for the elimination of defects that occurred through no fault of the person operating the knife;
5. The lifetime warranty does not cover physical wear and tear on the knife;
6. The lifetime warranty does not apply to partial or complete destruction of the knife caused by excessive overloads during operation;
7. There is an original box with a sticker from the official dealer.

Operating standards:

1. Always store your knife in a dry, warm place or at a natural temperature for the time of year;
2. Do not subject the knife to excessive overloads, which could lead to partial or complete destruction of both the structure as a whole and its elements;
3. When using a knife, be guided by social norms and a sober view of the need to use this tool;
4. Always remember that a knife is a source of increased danger, and if handled carelessly can cause harm to both the person operating it and the people around him;
5. Remember that a knife is not a means of production and is not intended for industrial use;
6. A knife, like any mechanical device, requires periodic maintenance and lubrication in accordance with the manufacturer's recommendations**;
7. Sharpening a knife is allowed only with the help of tools recommended by the manufacturer, or in workshops that have professional equipment, in strict accordance with the instructions.