Work Sharp diamond plate coarse for sharpener Guided Field 4 "Coarse Diamond Plate 220

Description of the diamond plate for the Work Sharp Guided Field 4” Coarse Diamond Plate (220):

The abrasive plate from the Work Sharp brand is a replaceable component for the branded manual sharpener Work Sharp Guided Field Sharpener (WSGFS221), which is an analogue of the plate attached to the sharpening device.

The diamond plate surface is resistant to damage and has a long service life, maintaining its efficiency for at least 75 sharpening cycles. But most importantly, the quality of the finish is achieved thanks to the uniformity of the abrasive grains, which is achieved through the use of a patented technology during production.

The 220 grit coarse diamond abrasive is intended for the initial stage of blade sharpening, during which a severely dull and damaged cutting edge is formed and restored. To return the blade to razor sharpness, after processing with a coarse-grained plate, it is necessary to sharpen the blade on a fine-grained plate and polish it using a leather strap.

The dimensions of the plate are 100 x 24 cm. It is easily installed on the design of the branded sharpener and does not require additional manipulations before direct use.

Characteristics:

• replaceable sharpening plate for the Work Sharp Guided Field Sharpener (WSGFS221);
• abrasive material – diamond;
• grit size – 220 grit;
• suitable for the initial stage of sharpening blades;
• dimensions – 100 x 24 cm;
• The official warranty is valid for 14 days after purchase.