Work Sharp Mechanical Rolling Knife Sharpener WSKTNRKS-I

Description of the Work Sharp mechanical Rolling Knife Sharpener WSKTNRKS-I:

The WSKTNRKS-I manual sharpener allows you to sharpen kitchen, camping and hunting knives quickly and with minimal effort. The model is designed to care for tools with both folding and fixed designs, provided that the blade has a straight sharpening (the sharpener is not suitable for sharpening serrated blades and scissors).

The design consists of two parts: a platform with magnetic side faces and a roller with a rotating abrasive disc.

Each edge of the platform is set at a specific angle (15°, 17°, 20° and 25°), which allows you to sharpen any type of blade. Rubberized feet provide stability to the platform and prevent it from sliding on the smooth surface of the kitchen countertop while processing the cutting edge of the knife.

The main sharpening process is carried out thanks to the roller, on which you can attach one of the three abrasives from the kit:

• 320 grit diamond – for primary blade processing;
• 600 grit diamond – for the main sharpening stage;
• fine-grained ceramics – for sharpening the cutting edge.

To use the sharpener, you don't need to have any special skills in caring for cutting tools. All you need to do is fix the blade on one of the edges of the platform and run a roller with an abrasive disc over the blade. Then you need to repeat this procedure to process the blade on the opposite side.

The roller has wheels built into the base that do not scratch the table surface and guarantee smooth movement of the abrasive along the entire length of the blade. The upper part of the roller body is slightly tapered, which, together with small notches, contributes to a firm hold of the structure.

The abrasive discs from the set can be stored in a magnetic platform - there are special compartments for this. The discs are fixed in the platform in a vertical position, so it is not recommended to store the sharpener in a low-height kitchen drawer, so as not to damage the abrasives when the drawer is pulled out.

Characteristics:

• manual sharpener for maintaining blades with direct sharpening;
• suitable for sharpening santoku knives, chef's knives, paring knives, as well as tourist and hunting blades;
• the design consists of a platform with magnetic edges and a roller with rotating abrasive;
• The kit includes 3 abrasives: diamond grits 320 and 600 grit + ceramic;
• the edges of the platform are set at different angles: 15°, 17°, 20°, 25°;
• the platform is equipped with rubberized feet;
• Abrasive discs can be stored in special compartments in the main platform.