Work Sharp replacement disc 320 GRIT for ROLLING KNIFE SHARPENER

Description of Work Sharp 320 GRIT replacement disc for ROLLING KNIFE SHARPENER:

The abrasive disc is manufactured by the American company Work Sharp as a replacement part for the brand's WSKTNRKS-I sharpener. The accessory is suitable for sharpening blades with a straight cutting edge.

The abrasive material is diamond. Resistance to damage and chipping when dropped or directly subjected to mechanical impact guarantees a long service life of the material, even with frequent use.

The grain size of the disc reaches 320 grit. The abrasive provides quick and thorough primary processing of the blade, during which chips, burrs and other damage to the blade that occur when cutting particularly dense materials are eliminated.

The abrasive is easy to use: it does not need to be pre-wetted in water before use. It is enough to spray the disc with water to prevent the diamond from clogging with metal shavings, fix it on the sharpener and smoothly run it along the entire length of the cutting edge. Due to the large grain size, it is recommended to avoid excessive pressure on the sharpener with the disc when sharpening the blade - otherwise this may lead to the removal of an excessive amount of steel from the blade and its premature thinning.

Characteristics:

• replaceable abrasive disc for sharpening knives with a straight cutting edge;
• suitable for Work Sharp WSKTNRKS-I manual sharpener;
• material – diamond;
• grit size – 320 grit.